Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Beneteau First 27
Sail

Beneteau First 27

FIRST 27 "Performance" Carbon Rig w/ North Sails Racing Package.
Year
2023
Condition
New
Length
312

Description

FIRST 27 "Performance" Carbon Rig w/ North Sails Racing Package

The First 27 is a small towable sports cruiser packed with potential. A born leader, she is ideal for racing offshore, where she eats up the miles. Yet she is also perfect for comfortable sailing adventures shared with friends.

CONSTRUCTION

• Hull and deck constructed with Vacuum Infusion of Vinyl ester resin, foam and Soric GRP sandwich with unidirectional and biaxial laminates

• Hull is reinforced with Infused GRP stringers in the keel and in bow sections

• Hull and deck are moulded in single tone off-white

• Deck with moulded high traction non-skid

• Two transoms hung balanced rudders, built of GRP foam sandwich

• Chainplates bolted to the main structural bulkhead

• Aluminium mast support bolted to the keel structure

• Bolts, screws, and fittings are all made of marine-grade stainless steel.

• An underwater area finished in gelcoat, prepared for sanding, epoxy primer and antifouling application

KEEL ARRANGEMENT

• Fixed keel with T-shaped lead bulb, main steel structural element and epoxy GRP enclosure,

• Laminated areas are pre-painted with epoxy primer for easier antifouling treatment

 

DECK EQUIPMENT

• 45 cm / 18 inch high stainless steel pulpit, pushpit and six stanchions with

• double lifelines

• Stainless steel bow and stern mooring cleats

• Stainless steel chain plates for side shrouds and forestay

• Wichard folding pad eyes on the stern for backstay attachment

• 2x Harken STA15 secondary halyard winches and 2x Harken STA20

• jib and gennaker trim primary winches

• Two rope bags and two winch handle bags

• Wide Ronstan aluminium mainsail traveller installed over the tiller ENGINE

• GRP tiller in white with Spinlock EA1200DS tiller extension

• Laminated tempered glass windows on both sides of the hull

• Laminated tempered glass windows on both sides of the cabin

• Cabin opening hatch of 58 cm x 58 cm / 23 inch x 23 inch for light, ventilation and deck access to the

mid-section compartment

• Deck opening hatch of 25,5 cm x 25,5 cm / 10 inch x 10 inch for front cabin ventilation

• Bow anchor locker

• Cockpit benches with lockable storage compartments

• Stern storage compartment cover

• Manual bilge pump operated from the cockpit

 

ENGINE

• Yanmar 2YM15 15 HP inboard diesel engine with shaft drive

• B-20 engine control panel

• 25 L / 6.6 gallons fuel tank

• Gori 15x10 RH two-blade folding propeller

 

ELECTRICITY

• Custom electric control panel with five switches and smart Philippi LCD battery control display

• Remotely controlled master switches for service and engine battery on the control panel

• Standard 12V and USB plugs in the saloon

• 12V 70AH AGM service battery in the engine compartment

• 12V 70AH AGM starter battery in the engine compartment

• Ambient indirect LED lights around the ceiling

• One mid-section and two front cabin battery LED lights

• Masthead LED navigation and anchor lights

• Seanapps tracker to connect, monitor and control boat systems remotely on your mobile phone with a

1-year subscription

• Pre-wiring for most of the available electrical options

 

INTERIOR

• Bulkheads and furniture lightly covered with mat paint with white gel coat on the moulded parts for

light, clean and low maintenance finish

 

FRONT CABIN

• Double V-berth with insubmersibility volume underneath

• Opening hatch of 25,5 cm x 25,5 cm / 10 inch x 10 inch for front cabin ventilation • Faux leather cushion

 

MID-SECTION COMPARTMENT:

• Anopeninghatchof58cmx58cm/23inchx23inchforlight,

• ventilation and deck access to the mid-section compartment

• Sail locker panel in faux leather on the port side

• The base for chemical or flush toilet with monolithic reinforcements

• for valves on the starboard side

• Two faux leather foldable magnetic doors which are closing the toilet

• compartment

 

SALOON

• Open-space saloon area with large Plexiglass companionway washboard and sliding hatch

• Wooden benches on both sides of the saloon, divided into four covers of the storage space

underneath, with Faux leather cushions

• Custom made well-insulated 25L icebox under port cover, with fridge compressor upgrade possibility

• Berths in the stern on both sides, with insubmersiblity chambers underneath

• Padded back-supports with storage behind the nets

• Keel box cover/strucutre with table/navigation box attachment point

• Keel box cover/strucutre with table/navigation box attachment point

• Indoor/outdoor table attachment point in the centre

• GRP boxes under the ceiling and under the companionway for

• electrical equipment

• Engine room cover with two ergonomically shaped wooden

• companionway steps

• Beige EVA foam floorboards

• Indoors/outdoor foldable wooden table with storage bag in GREY

 

EQUIPMENT

SIGNATURE INTERIOR PACK IN BEIGE

• Premium Sunbrella fabric for cushions in BEIGE or BLUE colour

• Cushions for front cabin V-berth and saloon benches

• Cushions for cockpit benches

• Foldable magnetic doors in premium textile,

• Foldable sail locker panel in the midsection in premium textile,

• *Replaces standard cushions, magnetic doors and sail locker

 

FIRST CREW BAGS (6 PIECES) IN A GREY included with SIGNATURE PACK

• Water repellent PVC easy-to-hang FIRST crew bags

• Attachment points for four bags in the saloon and two in the front cabin

 

GALLEY

• Galley top surface and sink made of moulded GRP with gelcoat finish for easy cleaning

• Water drain with valve under the sink

• Slim foldable cold water tap

• Wooden cover for the sink

• Single gas cooktop with pan holder

• Gas installation with valve and gas bottle locker (2,5 L / 0.66 gal) under cockpit benches

• Storage place for cooking equipment with a closing panel under the galley

• Includes all components of Freshwater system and necessary plumbing installations

• Galley replaces sail locker panel, part of standard configuration

 

FRESHWATER SYSTEM

• Flexible 55L / 14.5 gallons water tank, placed in storage behind the engine compartment under the

cockpit

• 12V water pressure pump with the control switch on the electric panel

• Shower handle with housing on the stern, next to the bathing ladder

• Plumbing

 

FRIDGE COMPRESSOR

• Danfoss compressor/evaporator with the controller

• A dedicated switch on the electric panel

 

CLASSIC TOILET

• ABS plastic bowl (only 3kg/ 6,61lbs) by RM

• 30L / 7.9 gallons unique blackwater tank, installed in the toilet

• compartment

• Plumbing with Marelon valves

 

ELECTRICITY & NAVIGATION

B&G TRITON2 COASTAL PACK

• Triton2 4.1-inch colour display in the coachroof

• DST810 transducer in front insubmersibility chamber

• WS310 Wind Pack with 20m / 65’ 7’’ Cable and Interface

• NMEA2000 starter kit with needed cables and connectors

• External ZG100 GPS antenna

• Dedicated control panel switch

 

B&G TRITON2 AUTOPILOT PACK

• Underdeck autopilot installation for instant use

• Triton2 4.1-inch colour display on the coachroof

• Triton2 Autopilot controller at the companionway

• WR10 Wireless autopilot remote and base station

• NAC-2 low-current autopilot computer

• RF-25 rudder feedback unit

• Precision-9 compass

• Raymarine Linear Drive Type 1

• Autopilot quadrant arm and other assembly parts

• Wiring and dedicated control panel switch

 

B&G V60 VHF

• V60 VHF Marine Radio with DSC and AIS receiver

• SCOUT KM-10S VHF Fiberglas Antenna

• Wiring and dedicated control panel switch

 

COMPASS PLASTIMO CONTEST 101

• Plastimo Contest 101 compass mounted on bulkhead next to companionway

• Compass light connected to navigation lights switch

 

AUDIO

• Fusion MSRA210 FM radio with Bluetooth connectivity installed in the box under the ceiling

• Four Fusion XS40 waterproof speakers (4-inch, 120W), two in the cockpit and two in saloon

• 110V CHARGING PACK

• 110V charger with fuse,

• External shore cable plug & shore cable

• 110 V internal plug

 

RIGGING

CARBON RIGGING PACKAGE

• CompoTech mast and boom with two sets of swept-back spreaders build in high-quality carbon fibre

• Ronstan aluminium mainsail track (for mainsail cars),

• All carbon parts UV protected

• Mast transport & storage bag

• Continuous 1x19 standing rigging with bottle screw adjusters

• Retractable carbon bowsprit controlled from the cockpit

• Dyneema pole-out control line

• Dyneema gennaker tackline

• 2:1 Dyneema mainsail halyard with Wichard MX8 halyard shackle

• Dyneema jib halyard

• 2:1 Dyneema staysail halyard

• Dyneema masthead gennaker halyard

• Dyneema fractional gennaker halyard

• 9x Spinlock clutches for halyards, mainsail reefs and bowsprit control lines

• Ronstan blocks and cleats for the mainsail, jibs and gennakers control lines

• One tapered mainsheet with ball bearing low friction blocks

• Three mainsail reef lines

• Control line for the mainsail traveller

• 8:1 outhaul purchase led inside the boom

• 8:1 cunningham purchase

• 16:1 vang purchase

• Three jib sheets

• Spliced Dyneema jib inhaulers with a fixed length

• 2:1 jib downhaulers with control lines, cleats and blocks

• Two tapered gennaker sheets with blocks

 

FACNOR FD110 JIB FURLER

• Facnor FD110 flatdeck furler with flat aluminium profile

• Customised forestay toggle

• Spinlock cluth for furling line on the side of the cockpit

 

ADJUSTABLE JIB INHAULER SYSTEM

• Adjustable jib inhauler for precise 3D trim of the jib

• 6:1 purchase on the coachroof

• Replacing standard fix-length jib inhauler

 

BARTON RODKICKER/BOOMKICKER

• Barton composite Boomstrut

• Prevents the boom from dropping into the cockpit or onto the coach roof

 

SAILS

NORTH SAILS PERFORMANCE MAINSAIL

• Square top mainsail, full battens, laminate material

• Triradial cut, with three reefs, 26,2 m2

• Ronstan ball-bearing traveller system, Series 19 cars set for an aluminium mast track

 

NORTH SAILS J1 JIB FOR FURLER

• Furling jib for Facnor FD110, laminate material

• Triradial cut with vertical battens, 19,5 m2

 

NORTH SAILS A5 FRACTIONAL GENNAKER IN A CHOSEN COLOUR

• Fractional gennaker, reacher, 64 m2

• Nylite 90 - performance ripstop nylon, 1,12 oz.

• Colour options – RED, WHITE or BLACK

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Specification

Year
2023
Condition
New
Price
Request Price
Type
Length
312
Fuel Type
Diesel
Hull Material
Fiberglass
Location
Mississauga, Ontario, Canada
LOA
27 ft 9 in
Length at Water Line
26 ft 3 in
Beam
8 ft 4 in
Max Draft
5 ft 7 in
Keel Type
enums.keel-type.kt-bulb
Displacement (Dry Load)
3750 lb
Ballast
1345 lb
Total Sail Area
109.7 m²
Headsail Area
19.5 m²
Mainsail Area
26.2 m²
Max Bridge Clearance
40 ft
Engine Type
Inboard
Engine Make
Yanmar
Engine Model
2YM15
Engine Year
2023
Power
14 hp
Drive Type
Direct Drive
Propeller Type
2 Blade
Folding Propeller
Yes
Propeller Material
Bronze
Cabins
1
Double Berths
1
Single Berths
2
Heads
1
Fuel Tanks
1 x 25 liters
Fresh Water Tanks
1 x 55 liters
Holding Tanks
1 x 30 liters
Hull Shape
Monohull
Hull Warranty
7 years

Contact Seller

If you are interested in getting more information, please leave your request.

Contact Seller

If you are interested in getting more information, please leave your request.
© 2024 SeaMag. All rights reserved.