Beneteau First 25.7

We offer for sale First 25.7 2006. She is registered under the Croatian flag, and VAT is not included.

 

First 25.7 will captivate you with their performance and offer wonderful sensations, without denouncing their family character.

She was used for charter. She has a new main sail and low engine hours

Yacht is located in Croatia.

Sail Area

I : 33.79 ft
J : 9.71 ft
P : 31.99 ft
E : 11.48 ft
Working Sail Area : 393.96 sq ft

Manufacturer Provided Description

Extended hull lines, fixed or lifting keel and a generous sail plan with no compromise on comfort.

Additional Description

- YACHT CLUB PACK -

• 4 removable stowage nets fixed on two stainless steel bars the length of the hull to port and starboard.
• Steering compass on bulkhead.
• Teak slatted cockpit benches.
• Mainsheet track in cockpit.
• Stainless steel bow roller fitting.
• Gimballed 2-burner gas hob + gas locker in cockpit.

- A1 ELECTRONICS PACK -

• Raymarine ST 40 log depth sounder.

- SAIL KIT -

• 4 batten mainsail with 2 reefing lines.
• Furling genoa with anti-UV strip (110% overlap).
• Lazy Jacks.

OTHER OPTIONS AVAILABLE - SPINNAKER OPTIONS -

• Asymmetric spinnaker gear with pole, sheets, halyard, pole fitting, 3 swivel eyes.
• Symmetric spinnaker gear (spinnaker pole downhaul, uphaul, 2 spinnaker sheets, halyard, 2 spinnaker sheet barbers).
• Spinnaker pole.
• 2 H32.2STA winches.
• Opening hatch to head compartment.
• 50 L rigid WC holding tank.
• Folding blade propeller.
• White hull.
• Fittings for beaching legs.
• Beaching legs.
• Supplementary battery.
• Radio CD/MP3 player.
• Windex windvane.
• Supplementary opening hatch in head compartment.

Additional Description

The cockpit is equipped with:

• 2 shelved lockers.
• Liferaft stowage aft of cockpit.
• Manual bilge pump.
• Engine control lever.
• The cockpit is self-draining.

Additional Description

• One version of accommodation.
• The woodwork is of Mukali, pear finish.

- FORWARD CABIN -

• 1.90m x 1.50m double berth with mattress and covers.
• Under berth stowage.
• Opening hatch on the coachroof (527 x 397).

- SALOON -

• Headroom: 1.75m.
• 1 settee convertible to double berth (as standard) and 1 settee doubling as single berth with mattress and covers (1.95 m x 0.60 m and 2.05 m x 0.60 m).
• PVC ?frégate? upholstery.
• Central dropleaf table.
• Shelves along hull sides.
• Stowage under the settees.
• 2 oval fixed hull ports.
• 2 opening ports on coachroof coaming (649 x 193).

Additional Description

• Supply: The 12 V electric circuit is supplied as standard by a 12 V 70 Amp battery.
• Electrical panel : 6-switch 12 V electrical panel.
• Lighting and sockets: Lighting in the saloon, heads and forward cabin, as well as in the galley and at the chart table.

Additional Description

• Headroom: 1.73m.
• Stainless steel safety rail to hob.
• GRP sink with spout, foot-pump and polythene chopping board.
• Under sink stowage ? stainless steel basket and clip support for dustbin.
• 50L GRP icebox with baskets and wood cover.
• Bottle storage.
• Manual bilge pump.

Additional Description

• Sound-proofing foam in engine compartment.
• Transmission is by stainless steel propeller shaft with a composite fibreglass epoxy bracket.
• Twin-bladed propeller.
• Engine control panel is at the chart table.
• Fuel tank has a capacity of 30 litres.
• Water and diesel filters and sediment reservoir.

Additional Description

• The hull is a single-skinned GRP laminate.
• A structural inner moulding formed with unidirectional materials is bonded and laminated to the hull at various points. This plays an important structural role by absorbing the loads and pressure points (shroud chain-plate tie rods, keel, rudder, etc.) throughout the structure, spreading these to reduce stresses on the hull. The surface material of the inner moulding makes it easier to clean and provides a better finish.
• The hull gel coat is grey in colour.

Additional Description

• The deck is of glass fibre/balsa/polyester resin sandwich construction to achieve an improved balance of rigidity/lightness and optimal insulation.
• All working and circulation areas are treated with ?Picot? non-slip coating. An inner moulding is bonded to the deck interior to improve its finish.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.