Falmouth Cutter

Designer Lyle C. Hess (40 built)
Builders: Cape George Marine Works and Sam L Morse Co.
recreational keelboat, fiberglass hull with wood trim.
Cutter rig, spooned plumb stern,a transom hung rudder with tiller and fixed long keel. carries 2500lbs of lead ballast.
fuel tanks: 15 gallons
water 25 gallons
accommodations:two quarter berths which double as seats for the dinette table. The table can be slid under aft under the cockpit.The port -side galley includes a Wedgewood gimbaled 2 burner stove.The ice-box is on the starboard side as is the nav station. The nav station seat ia a quarter berth. A double berth is in the bow along with the head.Includes opeing hatch and fix bronze opening ports.The wood is all teak except the bow sprit which is made of fir.

Equipment:
Yanmar 2YM15 diesel 13hp
Elliott/Pattison Sails 2023
Mainsail 3 reef points
110% Furling Jib
Hanks on Staysail
Dyneema lifelines 2024
Standing and running rigging 201
Radcliffe self-steering vane (2)
Raymarine St 2000 tiller master autopilot
Sculling oar
(2) Bilge pumps one manual and one
Automatic
Data Marine: depth, speed/log
Radio VHF Horizon
Garmin GPSmap78C
Westmarine PRU-3 Roll-up Inflatable dingy.
Anchor gear: CQR 25# w/galvanized chainand 200 of 1/2" 3-strand nylon rode.
Bruce 15 Kilo Claw w/300' galvanized chain.