Sadler 26

Sadler 26 'Jumana' - built 1983

'Jumana' is a well-presented and well-equipped Sadler 26 available for immediate viewing. A Yanmar 1GM inboard engine, Eberspacher heating, plenty of sail and canvas work and a saloon which has been recently reupholstered made 'Jumana' a perfect boat for entering into yacht cruising.

Dimensions

Length Overall: 7.85m (25' 9")

Waterline Length: 6.25m (20' 6")

Beam: 2.87m (9' 5")

Draft: 1.42m (4' 8")

Displacement: 2,177 kg

Engine

Yanmar 1GM 10 inboard diesel engine

10hp

Shaft Drive

Accommodations

The Sadler 26 offers great accommodation for the size of the boat. 5 berths are split between the single quarter berth to port, a double 'V' berth in the forepeak and the main saloon which converts to a second double berth. The galley is to starboard with a Flavel Vanessa 2 burner gas oven and grill, a single stainless-steel sink and a cool box. Engine access is under the companionway step, and there is storage under the berths and outboard in the main saloon as well as the hanging locker between the saloon and the forepeak. The heads are located on the port side, opposite the hanging locker.

Electronics and Navigation

12v system throughout the boat with two 75ah batteries, 1 Engine Start and 1 Domestic, charged by the engine alternator.

Instruments:

Navman Tracker 5600 Chartplotter

Nasa Clipper Depth

Nasa Clipper Wind

Garmin GPS120

iCom IC-M323G GPS DSC VHF

Plastimo Steering Compass

Mast, Sails & Rigging

Kemp masthead, single spreader, alloy mast and boom

Track on the front of the mast for a pole

Continuous headsail furling

Slab reefing

Sail

Mainsail

3 x Headsails

3 x Spinnakers

Sprayhood in blue canvas

Stackpack with lazyjacks in blue canvas

Deck Equipment

2 x Lewmar 30 Self-Tailing, 2-Speed primary winches

2 x Barlow 16 coachroof winches

2 x Antel 8 spinnaker winches

10 x Barton coachroof clutches

Barton genoa tracks with adjustable cars

Barton mainsheet track

CQR anchor with chain

Stern, midship and bow mooring cleats

Stainless-steel pullpit, pushpits, stanchions and guard wires

Bow roller

Inventory

Yamaha 2 stroke outboard

Tender

Fire blanket

Fire extinguisher

Various warps and fenders

Disclaimer

In this case we are acting as brokers only.  The Vendor is not selling in the course of a business.  Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed.  The particulars are intended only as a guide and they do not constitute a term of any contract.  A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and / or to have an engine trial conducted, which if carried out by us shall not imply any liability for such engine on our part.

Note to seller and purchaser:  If the boat you are selling or purchasing is registered, please ensure that the registration is completed after the sale of the boat.  If the purchaser wishes to cancel the registration is the duty of the seller to contact the Registry and inform them that the registration is to be cancelled.  If the purchaser wishes to continue with the registration, it is the duty of the purchaser to complete the relevant forms and post off the bill of sale to the Registrar.