Peterson Gaff Rigged Cutter

Murray G. Peterson's schooner designs are well known, but many consider Susan — a modest 28-foot schooner that he drew for himself and his family late in life — to be his greatest achievement. The boat was handsome and rugged, and offered the feel of a yacht twice its size — all very appealing to Frank Mann, a Massachusetts yachtsman with a penchant for gaff rig and offshore cruising.

Mann and his wife, Katrina, had been looking for a traditional boat that, while small in size, had the sea-keeping ability of a much larger yacht. Spacious accommodations were not a concern, and complicated systems were out of the question. A modified Susan design seemed like the right choice.

Mann approached Bill Peterson, the late designer's son, and negotiated rights to use the lines to build one hull. They then had Peterson, who carries on his father's work, lengthen the yacht by 2 feet and draw the boat as a topsail cutter. A traditional schooner rig with two masts and split houses would sacrifice precious accommodation space, especially on a boat of this size.

Katy was to be built plank on frame, cedar on oak. Mann began searching for a yard that would be up to the task and suggested the project to Cape Cod boatbuilder Ned Crosby, owner of E.M. Crosby Boatworks in West Barnstable, Mass., and grandson of the legendary boatbuilder Chester A. Crosby. Ned Crosby enlisted two of his grandfather's former employees, Mike Santos and Ted Crosby, a cousin. Together they brought 90 years of boatbuilding experience to the yard.

Although the boat's construction was traditional, lofting the hull was a high-tech affair. Mann had Peterson's lines loaded into a CAD system, and 20 plywood panels were laser cut to produce a jig type of mold. Mann said at first Crosby was skeptical of the lofting method, but once the jig was assembled, the precision-cut and -labeled form proved to be a major time saver.

Like Susan, Katy has a spoon bow in contrast with the clipper bow Peterson drew on many of his other designs. High bulwarks, lots of freeboard and broad teak decks enhance the yacht's big-boat feel. Also, because the house has been kept small, there is room for wide side decks, making the yacht's beam seem much broader than 9 feet.

Below deck, every bit of precious space has been used brilliantly. Up forward are a simple nav station, a galley and two V-berths that can be expanded to sleep four. The galley is fitted with a two-burner Force 10 stove and oven that is concealed by the counter when not in use. To port there is a fully enclosed head with additional storage space.

The joinery is bright finished teak, mahogany and cypress cedar, and the house overhead is painted off-white in the Herreshoff style. Countless traditional details abound, including deck prisms, bronze hardware from Davey & Co. in Colchester, England; wooden blocks from Dauphinée; and an antique Japanese binnacle, complete with a kerosene lantern.

Under current ownership since 2018, the following upgrades have been made to KATY:

-Strip and refinish all brightwork (10+ coats) including spars

-New cockpit and interior cushions

-New Yanmar engine panel

-New B&G Vulcan GPS Plotter, SIMRAD RS35 VHF, and NAIS 500 AIS transponder

-Rebuilt Edson worm drive steering gear

-New mainsail, staysail, and Jib by Nat Wilson

-New custom sail covers

-Full in-water winter canvas cover with frame (see photos)

-Re-wired mast with LED tri-color, anchor light, and strobe

-New custom bronze masthead assembly and removable running back-stays

-New EPIRB

-New dining table

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.