2013 TRACKER GUIDE V16 LAKER DELUXE W/ SUZUKI 30 EFI 4S & TRAILER
Manufacturer Provided Description
The TRACKER® Guide V-16 Laker is our only all-welded aluminum Deep V utility boat. One of the most heavy-duty boats in its size class, it’s constructed of tough .100 5052 marine alloy, just like our top-of-the-line Deep V boats.
Onboard, you'll find vinyl-covered raised fishing decks fore and aft (which double as seats)—with a base for an optional fishing seat on the bow deck. Midship, there are two vinyl-covered boxes which can be used as seats as well. The port box features a livewell below, and the starboard box has storage below.
- NEW powder-coat process for a higher sheen, longer-lasting paint
- Deep V all-welded hull design
- .100 5052 marine aluminum alloy hull & transom
- Non-skid vinyl throughout
- Raised bow casting deck w/pedestal seat base
- Raised aft casting decks (double as seats)
- Port livewell w/lid
- Starboard storage box w/lid
- Five-year all-welded structural limited hull warranty
Additional Specs
- Length: 16'
- Bottom width: 60"
- Max. recommended HP: 40 HP
- Deadrise: 8 Degrees
- Beam: 74"
- Approx. weight: 655 Lbs.
- Approx. package weight: 1386 Lbs.
- Max. person capacity: 4 Persons
- Hull material: 0.100 5052 Marine Alloy
- Transom height: 21"
- Max. weight capacity: 1200 Lbs.
- Max. person weight: 735 Lbs.
Standard Features
Comfort, Convenience & Peace of Mind
- Bow & stern eyes
- Limited lifetime hull warranty
- Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
Construction & Exterior
- Reverse chine hull design
- Transom motor-mounting plate for increased strength & durability
- Pressed-in hull performance strakes
- Welded-in longitudinal stringer system for full-length support of the running surface
- Extruded box-beam, corner-braced all-aluminum transom that is welded in to unitize & strengthen the hull
- Injected, expanding hull foam for extra hull stiffening, flotation & quiet-riding sound insulation
- All-welded, 2-piece .100 aluminum Deep V hull w/8° deadrise, wide beam & stable bottom for a smoother, dryer ride in rough waters
- Heavy-duty 1-piece, extruded aluminum gunnels for structural strength & rigidity
- Cool Grey color scheme
- All-welded, unitized construction & interior components contribute to structural integrity
Interior
- Non-skid vinyl surface throughout
- Port midship wetwell/livewell
- Starboard midship storage compartment
- Aft platforms, midship side boxes & raised bow casting deck double as seating
- Oversized raised bow deck
- Raised port & starboard aft platforms
- Bow pedestal base location
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.