Ribeye A Series 600

This stunning Ribeye A600 was built to her current owners specifications in late 2021. With its high volume deep-V hull the Ribeye A600 has proven itself to be a very capable and dry RIB ideally suited for coastal use. Lavished with a suite of extras from the factory this immaculate example now offers a considerable saving against the price of a new build A600. Her comprehensive inventory including:

• Carbon black impression Hypalon tubes
• Synthetic teak decking
• Carbon cross stitch upholstery
• Stainless steel A-frame with ski eye
• Elite helm console
• Ettore steering wheel
• Garmin plotter/fishfinder and DSC VHF
• Yamaha F115BETL outboard engine
• UltraGlide galvanised road trailer

Currently lying afloat the Ribeye A600 ENDEAVOUR is available for immediate viewing.

The Boat

CE Category C certified

Traditional deep-V GRP moulded hull

Black gelcoat finish to hull moulding

Keel guard fitted to keel from factory

Carbon black impression Hypalon tubes with over pressure relief valves

Protective rubber rubbing strake

Protective rubber wear panel applied to tubes around bow section

External lifelines secured to tubes

GRP moulded deck with raised bow locker, fitted with optional cross stitch cushion

Black gelcoat finish to deck moulding

Synthetic teak finish to deck and forward locker top

Ribeye Elite helm console including Ribeye glovebox

Ettore steering wheel, hydraulic steering system

Forward facing seat built into console forward fitted with cross stitch base and backrest cushions

Stainless steel ‘flip’ helm seat upgrade with bolstered cushions in cross stitch upholstery

Rear bench seat with bolstered base and backrest cushions in cross stitch upholstery

Stainless steel back rest with optional cushion for aft seat

Large locker space aft, accessed by lifting aft seating unit

Custom stainless steel A-series A-frame in 50mm tubing with ski eye

Stainless steel bathing platforms to port and starboard with fold down swimming ladder

Bow roller with mooring cleat

Bow winching eye

Machinery

Yamaha F115BETL

115hp @ 5,800RPM

4 cylinder, 16 valve, DOHC, EFI fuel injection

Power trim and tilt

Battery charging – 12VDC, 35amp output

Yamaha Speed/Fuel and Tacho displays

Yamaha single lever control

Maintenance & Performance:   

Engine running hours @ September 2023 – 42hrs

Cruising Speed 20kts

Max Speed 35kts

TANKAGE:

Single built-in petrol tank

Approximate capacity 120ltrs

Electrical Systems

12VDC power system, charging from outboard

Single 12VDC battery

Electric bilge pump

Fusion Apollo RA670 stereo with 4x Fusion marine speakers

Blue LED deck lighting

LED navigation lights

Navigation and Communication Equipment

Plotter / Fishfinder – Garmin ECHOMAP UHD2 7” display with transom mounted transducer

DSC VHF – Garmin 115i DSCVHF radio

General Equipment

Canvas Work / Upholstery:

Ribeye full boat mooring cover

Ribeye customised engine hood with boat name

Cross Stitch upholstery to all cushions

Deck Equipment:

Ribeye removable teak table, with storage bag

Anchor with chain/warp rode

Fenders – Selection

Mooring Warps x2

Trailer:

Galvanised Ultraglide road trailer

Single braked axle

Lighting board

Disclaimer

In this case we are acting as brokers only.The Owner is not selling in the course of a business. whilst every care has been taken in their preparation , the correctness of these particulars is not guaranteed. The Purchaser is strongly advised to check the particulars and where appropriate at their expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.

This vessel is offered subject to prior sale, price change, or withdrawal without notice.