Talamex Comfortline TLA300 Air Floor Inflatable and Parsun 6hp F6ABMS Engine Pacakge

Excellent dinghy

The Talamex Comfortline TLA boat with air floor is a boat with inflatable keel and bottom. Because of this, the boat is light weight, has small package dimensions and has excellent sailing and rowing characteristics. In addition, the air floor increases the sitting-comfort and makes the building of the boat very easy. The Talamex Comfortline TLA boat with air floor is excellent to use as a dinghy or cruiser yacht

    TALAMEX COMFORTLINE: quality is the base

You are looking for a well equiped boat with excellent sailing charasteristics for an honest price? Then the Talamex Comfortline is thé boat for you!In the standard package of the Talamex Comfortline boats is amongst others: repair kit, aluminum seat, paddles, towing eyes, lifting eyes, landing line and a pressure relief valve.

The boats are available with a slatted-, air- and aluminium floor and as a RIB, varying in length from 200 up to 350 cm. On all boats is a 2 year warranty and all Talamex boats are CE certified by the Dutch Marine Inspection making them meet all European requirements

• Model :TLA300
• Length: 300cm / 3.0m
• Width: 153cm / 1.53m
• Weight (incl. paddles) :37.0kg
• Max Load Weight: 425kg
• Max Engine: 7.4kW / 10hp
• Max Persons: 4 adults
• Number Air of Chambers: 3 + 1 + 1
• Tube Diameters: 42cm

Parsun 6hp F6ABMS Details

New lightweight single-cylinder PARSUN F6A four stroke with a manual starter and tiller handle. Enhanced features include a larger shift handle, toggle clamp, and throttle grip than in other motors of the same class. Low vibration rubber mounts are fitted between the powerhead and bottom cowling and at the base of the tiller handle, and a balance weight on the tiller handle effectively reduces vibration of the same.   Front and back, large easy grip carry handles make these engines easily transportable and, very importantly, the engine can be stored on either side or on its front without leaking engine oil due to PARSUN’s original oil leak prevention system. This means you will no longer have to worry about oil leakage when carrying the engine in the trunk of your car. A wet sump system with oil lubrication pump, as used in higher-end models, provides more reliability in engine lubrication. An auto decompression device fitted to the camshaft makes the manual starter much lighter to pull. A small, auxiliary prime pump is fitted to the fuel pipe before the carburetor in the cowling. By ensuring delivery of fuel to the carburetor, the engine can be started smoothly even after long-term storage. A DC 12 volt-6 amp alternator can be optionally fitted to provide electricity if required.   PARSUN FOUR STROKE 6HP OUTBOARD ENGINES FEATURES:

1. Exhaust through the middle of propeller so as to get low noise and low vibration for extra comfort.
2. Spiral bevel gear, stronger, run more quietly and can be used for higher reduction ratios with longer life.
3. High – strength clutch, more reliable and better performance.
4. Use ball bearing and needle bearing for driver shaft, long life and better performance.
5. Besides the oil dip-stick, also equipped with oil watch window.
6. Convenient auxiliary prime pump in cowling for easy starting after long storage. A small auxiliary prime pump is fitted to the fuel pipe before the carburetor in the cowling. By ensuring the delivery of fuel to the carburetor, the engine can be started smoothly even after long storage.
7. Bigger displacement, 3-5% more power output.
8. Wet-sump, forced bath lubrication system, protect the engine better.
9. CDI Ignition for easy start in all conditions: idle speed will be down to 1200~1300rpm (the fuel consumption will be reduced) and more quiet at idle speed by such new system

Other advantages:
1. Large carry handles for convenience and comfort.
2. Easy to use steering and large shift lever.
3. Built-in 1.3L fuel tank. F5A and F6A all have a built- in 1.3L fuel tank, eliminating the need for an external tank.
4. Position oil leak-free storage system: 3-position oil leak-free storage system offers an easy way to store your engine, whether you’re carrying it in a boat, a car, or a trailer.

Parsun 6hp F6ABMS Specification

• Weight: 27 kg 
• Engine-type: 4-stroke, 1-cylinders, OHV
• Displacement: 148cc
• Bore-stroke: 59.0 x 41.0mm / 2.32 x 1.61in
• Max Output: 6hp / 4.4kW
• Full Throttle RPM Range: 4500 – 5500 rpm
• Ignition-system: CDI
• Starting-system: Manual
• Start Control-system: Tiller
• Gear-positions: Forward / Neutral / Reverse
• Gear-ratio: 2.08 (27/13)
• Trim-tilt-system: Manual Tilt and Trim
• Fuel-consumption: 2.3 L/h
• Fuel-tank-capacity: Integral 1.3L
• Sump Oil Capacity: 0.6L
• Gear-oil-capacity: 100 cm3
• Shaft: 15″ Short
• Alternator-output: 12V DC
• Propeller Options: 3-7.8″ x 9″
• Overall Width: 390mm / 15.4in
• Overall Length: 718mm / 28.2in    

Disclaimer

Any advertisement on this website by Bill Higham Marine Ltd (the company) is subject to change at any time without prior notice. The company will not be held to either price or terms as laid out within this advertisement.    If an adjustment has been made by the company to (but not exclusively concerning) price or terms, then a representative of the company will inform the customer at the time of the enquiry by telephone or email. And before creating an invoice for the product or service.