Custom Longline Tender Crabber
Custom Longline Tender Crabber
Power

Custom Longline Tender Crabber

$640,000 USD
This 66-foot commercial fishing vessel, owned by Howard Maki, is a steel "whaleback" displacement monohull designed for various fishing activities, including crabbing, longlining, tendering, and crabbing. It features a single diesel inboard engine, steel hull construction.
Year
1979
Condition
Used
Length
792

Description

This 66-foot commercial fishing vessel, owned by Howard Maki, is a steel "whaleback" displacement monohull designed for various fishing activities, including crabbing, longlining, tendering, and crabbing. It features a single diesel inboard engine, steel hull construction

VESSEL TYPE:
66’ steel longliner/ tender/ crabber

MAIN ENGINE:

Make/Model: K19 Cummins
Hours: 22,000 hours
GENERATORS:

45kw John Deere generator
Hours: 35,000 hours
65kw John Deere generator
Hours: 0 hours (NEW)
REFRIGERATED SEA WATER (RSW):

Capacity: 26-ton Cold Seas RSW
Year: New in 2022
LONGLINE GEAR:

Includes:
Longline house
24” Kolestrand longline hauler
Morse controls
100 skates of stuck longline gear (very new)
ANCHORS:

Quantity: 16 anchors
POTS AND GROUND LINE:

300 7mm slinky pots
300 Dungy pots
4 door trilogy (new in 2022)
FISHING CAPACITY:

Packs 110,000 salmon
TENDER CONTRACT:

Has a good tender contract in Bristol Bay. Message me for details about contract. 

ENGINE SPECIFICATIONS:

Make/Model: Cummins KTA19; 500 HP.
Type: Diesel, inline 6-cylinder, four-cycle, turbocharged, aftercooled.
Serial #: Not seen.
Tach Gauge Hours: 12,539 hrs. (installed new 2000).
Exhaust: Dry; stainless steel vertical pipe; well lagged & wrapped.
Cooling: Keel cooled.
Transmission: Twin Disc MG 516; ratio 4.5 : 1; s/n: 3AF-403.
Ventilation: Passive through engine room vents.
Safety Alarms: Harris Electric low oil pressure, high water temperature, low water level.
Drive: (1) 54” x 40” bronze Coolidge four-blade propeller, driven on a 20’ long 4” stainless steel shaft with a 4” cold-rolled iron intermediate shaft. (1) spare 56” x 40” bronze propeller.
ADDITIONAL DETAILS:

VESSEL TYPE: Commercial fishing vessel
POWER: Single diesel inboard with propeller
HULL TYPE: Steel "whaleback" displacement monohull
OWNER: Howard Maki
HAILING PORT: Cordova, AK
WATERS NAVIGATED: Ketchikan, AK to Unimak Pass, AK, including the Gulf of Alaska.
BUILDER: Not provided
BUILDER LOCATION: Fort Bragg, CA
YEAR BUILT: 1979
TONNAGE: 83 gross / 57 net
LENGTH OVERALL: 66 feet
REGISTERED LENGTH: 59.8 feet
BEAM: 19 feet
DEPTH: 9.7 feet
DRAFT: Approximately 8 feet
CRUISING SPEED: Reportedly 9 knots @ 1600 RPM (cruise)
FUEL CONSUMPTION: Reportedly 10 GPH @ cruise

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Specification

Year
1979
Condition
Used
Price
US$640,000
Type
Length
792
Fuel Type
Diesel
Hull Material
Steel
Location
Anchorage, Alaska
LOA
66 ft
Beam
19 ft
Engine Make
K19 Cummins
Engine usage (hours)
22000

Contact Seller

If you are interested in getting more information, please leave your request.

Contact Seller

If you are interested in getting more information, please leave your request.
© 2024 SeaMag. All rights reserved.