Crevalle 26 Bay
Crevalle 26 Bay
Crevalle 26 Bay
Crevalle 26 Bay
Crevalle 26 Bay
Crevalle 26 Bay
Crevalle 26 Bay
Power

Crevalle 26 Bay

$95,000 USD
2016 CREVALLE 26' BAY; RIGGED WITH MERCURY 300 VERADO AND AN AMERA TRAIL TANDEM AXLE TRAILER
Year
2016
Condition
Used
Model
Length
312

Description

2016 CREVALLE 26' BAY; RIGGED WITH MERCURY 300 VERADO AND AN AMERA TRAIL TANDEM AXLE TRAILER

OPTIONS INCLUDED:  HARD TOP; MORRING COVER, EXTRA ROD HOLDERS, FORWARD CUSHION PACKAGE, LEAN POST UPGRADE STEREO W/AMP AND SUB; TWO BANK CHARGER/THREE BANK CHARGER; RAY MARINE A128; MINN KOTA 1-PILOT 36 VOLT; 1 - 20' POWER POLE BLADE, UNDERWATER LIGHTS, LIVEWELL RECIRC PUMPS, PORTA POTTIE; HELM PADS

 

The 26 Bay includes integrated trim tabs, a larger console, 83 gallons of fuel, and up to 300 horsepower capacity. We still include 2 removable 72 quart coolers and offer an in-console porta pottie, forward seating package and removable ski pylon. And as always, all Crevalle Boats feature our trademark Storm Grey helm face with integrated foot rests and room for a 12” chartplotter. For the serious fisherman, the 26 Bay has (2) 28 gal release wells, 1 baitwell/cooler, lockable rod storage for 10 rods, standard powdercoated leaning post with backrest, rod holders, and rigging tray, and in-floor storage for a 5 gallon bucket with cast net.

Hull and Deck

  • No wood construction
  • Coal tar epoxy coated fuel tanks
  • Single Piece Fiberglass Stringer System with foam flotation
  • 10 Year Transferable Hull Warranty
  • Black rub rail with Stainless Steel Insert
  • Composite Transom
  • Dedicated Anchor Locker
  • Position Control Hinges on all Hatches
  • Fiberglass Hatches Finished on both sides
  • NMMA Certified using ABYC Standards
  • Self Bailing cockpit
  • Forged Stainless Steel thru hulls with duckbill valves
  • Integrated swim platform with 3-step fold-out stainless swim ladder
  • Standard 6” Engine Jack Plate combined with notched transom allows our boats to leap on plane in shallow water with no propeller cavitation.  The notch provides so much water to the engine pickup that the engine can be run all the way up on the jack plate without fear of overheating the engine.
  • Marelon Seacocks (Composite material, no corrosion or electrolysis)
  • Anti-Venturi thru-hull fittings (Allows pumps to operate at speed)
  • Hidden deck drains with stainless covers and duckbill valves
  • Welded one piece stern eyes
  • Deep cockpit for a safe dry ride
  • Yacht Grip, non-skid deck
  • Setback transom provides full aft deck
  • Integrated swim platform with fold out ladder
  • Vertical rod holders on side of helm
  • Under gunwale rod storage for (2) 8′ rods each side
  • Forward rod lockers with room for (5) 7′-6″ rods on each side
  • 40″ wide flip up aft seat
  • Bow Dry storage
  • (2) removable 72 quart coolers
  • (6) Custom Crevalle pull-up cleats
  • (8) Stainless cup holders 6 are LED illuminated
  • Port and Starboard in-gunwale safety gear storage
  • 12″ Standard Multifunction display
  • Floor storage for 5 Gallon Bucket
  • Custom aluminum Leaning post with backrest, rigging tray, (4) rod holders, and (2) stainless cup holders, and storage bin
  • Unobstructed aft fishing deck
  • Pre wired 8 AWG wiring for trolling motor
  • Trolling motor plug panel with trim switch
  • Custom flat bar grab rails molded into the deck
  • Attwood 1100gph automatic/manual bilge pump
  • Fuel Water separator
  • Wet Sounds Speakers
  • Trim Tabs -Lenco with LED indicators

Release Wells (2)

  • Insulated 28 Gallon aft release wells
  • Venturi aeration bubbler
  • Dual jets
  • Protected overflow stand pipe
  • Commercial Aquarium type aeration
  • Blue gel coat
  • Attwood 800 gph, dual port aeration pumps
  • LED lighting
  • Check valves on intake plumbing to prevent water level from dropping while at speed.

Bait Well (1)

  • Adjustable aeration jet can be closed to convert bait well into fully insulated cooler
  • Wide opening allows easy access for cast nets
  • Side mounted overflow fitting with removable filter dome means no stand pipe to get in the way of netting bait
  • Blue gel coat
  • Sealed lid with double gasket prevents slosh at high speeds and during turns

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Specification

Model
Year
2016
Condition
Used
Price
US$95,000
Type
Length
312
Fuel Type
Gas
Hull Material
Fiberglass
Location
Seffner, Florida
LOA
26 ft
Beam
8 ft 6 in
Max Draft
1 ft
Deadrise at Transom
16°
Dry Weight
3600 lb
Engine Type
Outboard
Engine Make
MERCURY
Engine Model
300
Engine Year
2015
Power
300 hp
Propeller Type
3 Blade
Propeller Material
Stainless Steel
Heads
1
Max Passengers
9
Fuel Tanks
83 gal
Hull Shape
Modified Vee
Hull Warranty
10 years

Contact Seller

If you are interested in getting more information, please leave your request.

Contact Seller

If you are interested in getting more information, please leave your request.
© 2024 SeaMag. All rights reserved.