Crevalle 26 Bay

Clean freshwater 2016 Crevalle 26 Bay powered by a Yamaha F300XCA outboard, with only 321 hours. The boat comes with:

Yamaha F300XCA (320) Hrs
Sea Star Jackplate
112 Minn Kota I Pilot trolling motor with new 36 Volt LITHIUM Battery
12" Simrad GPS
Simrad radar dome
VHF
(4) JL Speakers (1) JL Subwoofer
Underwater Lights
Forward Seating Package
Tackle Storage
New upholstery
Owner Manuals
Service History
Nextrail Tandem Axle Aluminum Trailer W/ Spare

The 26 Bay includes integrated trim tabs, a larger console, 83 gallons of fuel, and up to 300 horsepower capacity. We still include 2 removable 72 quart coolers and offer an in-console porta pottie, forward seating package and removable ski pylon. And as always, all Crevalle Boats feature our trademark Storm Grey helm face with integrated foot rests and room for a 12” chartplotter. For the serious fisherman, the 26 Bay has (2) 28 gal release wells, 1 baitwell/cooler, lockable rod storage for 10 rods, standard powdercoated leaning post with backrest, rod holders, and rigging tray, and in-floor storage for a 5 gallon bucket with cast net.

Additional pictures are available.

Deck and Hull Equipment

No wood construction
Coal tar epoxy coated fuel tanks
Single Piece Fiberglass Stringer System with foam flotation
10 Year Transferable Hull Warranty
Black rub rail with Stainless Steel Insert
Composite Transom
Dedicated Anchor Locker
Position Control Hinges on all Hatches
Fiberglass Hatches Finished on both sides
NMMA Certified using ABYC Standards
Self Bailing cockpit
Forged Stainless Steel thru hulls with duckbill valves
Integrated swim platform with 3-step fold-out stainless swim ladder
Standard 6” Engine Jack Plate combined with notched transom allows our boats to leap on plane in shallow water with no propeller cavitation. The notch provides so much water to the engine pickup that the engine can be run all the way up on the jack plate without fear of overheating the engine.
Marelon Seacocks (Composite material, no corrosion or electrolysis)
Anti-Venturi thru-hull fittings (Allows pumps to operate at speed)
Hidden deck drains with stainless covers and duckbill valves
Welded one piece stern eyes
Deep cockpit for a safe dry ride
Yacht Grip, non-skid deck
Setback transom provides full aft deck
Integrated swim platform with fold out ladder
Vertical rod holders on side of helm
Under gunwale rod storage for (2) 8′ rods each side
Forward rod lockers with room for (5) 7′-6″ rods on each side
40″ wide flip up aft seat
Bow Dry storage
(2) removable 72 quart coolers
(6) Custom Crevalle pull-up cleats
(8) Stainless cup holders 6 are LED illuminated
Port and Starboard in-gunwale safety gear storage
12″ Standard Multifunction display
Floor storage for 5 Gallon Bucket
Custom aluminum Leaning post with backrest, rigging tray, (4) rod holders, and (2) stainless cup holders, and storage bin
Unobstructed aft fishing deck
Pre wired 8 AWG wiring for trolling motor
Trolling motor plug panel with trim switch
Custom flat bar grab rails molded into the deck
Attwood 1100gph automatic/manual bilge pump
Fuel Water separator
Wet Sounds Speakers
Trim Tabs -Lenco with LED indicators

Additional Equipment

Release Wells (2)

Insulated 28 Gallon aft release wells
Venturi aeration bubbler
Dual jets
Protected overflow stand pipe
Commercial Aquarium type aeration
Blue gel coat
Attwood 800 gph, dual port aeration pumps
LED lighting
Check valves on intake plumbing to prevent water level from dropping while at speed.

Bait Well (1)

Adjustable aeration jet can be closed to convert bait well into fully insulated cooler
Wide opening allows easy access for cast nets
Side mounted overflow fitting with removable filter dome means no stand pipe to get in the way of netting bait
Blue gel coat
Sealed lid with double gasket prevents slosh at high speeds and during turns